PLANT DADDY GRO G2 - Copper - SUMMER SALE $30 OFF - FREE FREIGHT ON THIS PRODUCT (Ships in 3 -5 days)

FREE FREIGHT ON THIS PRODUCT ONLY IN THE CONTINENTAL US

THE NEWLY DESIGNED G2 

PLEASE ALLOW 3-5 DAYS FOR SHIPPING  YOUR UNIT 

UNITS ARE FULLY ASSEMBLED AND READY TO GROW

$289.95 - $30 SALE - $259.95  Free Freight within the US - Includes over head light (recommended)

$279.95 - $30 SALE - $249.95 Free Freight within the US - Does not include over head light

Hydroponic growing is absolutely the easiest, most amazing way to grow tropical plants!  The visually stunning root growth creates living art!   98% of your bug issues are gone.  

System includes Plant Daddy Jungle Juice Plant Food

System includes cleaning brush

MAKE SURE YOU WATCH OUR "G2 SET UP VIDEO BEFORE YOU UNPACK YOUR UNIT YOU CAN ACCESS THE VIDEO WITH INCLUDED QR CODE

Our new G2 system is a result of major design improvements.

-our units are 3d printed and each unit has it's own character.  Slight color changes and texturing gives each unit it's own character.   The luxurious appearance of a brushed metal finish and the top quality created by the 3d printed plastics is very impressive. 

-stylish new lower wider profile at the base

-inner air line integration allows for no inner vinyl air lines to the air stone creating a sleek very simple crib design.  This stylish look makes cleanings even easier.

-comes with removable air stone for easy cleanings.  Let the air stone soak for 30 minutes in water before use for optimal bubble dispersement.   If you do not soak your stone it will not perform with nice small even bubbles until it has saturated the stone with water that will happen within 24hrs and even out the bubbles throughout the stone.

-the built in plant stand is a game changer when it comes to cleaning your system.  The plant stand protects and cradles your living plant arrangement in your sink for easy root and cylinder cleanings.

-easy air flow control knob access located in bottom of the base.  I run my pump 24hrs a day at full volume.   To make sure you are at full volume you can insert your finger into the air know access hole in the bottom of your base.  Pull down on the knob gently until it stops.  This is the full volume setting and your pump should be set at full volume. 

Elegant 3D printed designer colored base with ONLY 1 POWER CORD for the entire unit. 

The only option when ordering your G2 is the overhead light option. 

*DO NOT PLACE THE G2 SYSTEM IN DIRECT SUNLIGHT OR IN A HIGH HEAT AREA!  Intense heat or direct sun will damage the unit. We only recommend using the unit indoors.  Do not place unit on top of any surface that could be damaged by water.  Your unit may create slight vapor overspray onto your surface top.  This is easy to stop by adding a plant to the area allowing the over spray.  

Base -  Important!  The base must be placed on an area not located in high heat and with good ventilation for your unit and your plant.  The base houses the adjustable air pump, USB/110 Power Block - All airlines and back siphon valve are already assembled and in place.

*The G2 system offers 2 ways of growing your hydroponic plants

Crib - The crib is built into the collar and allows you to create hydro gardens combining multiple plants together.  The crib acts like a basket and holds and supports one larger plant or multiple smaller plants all combined together creating a hydro garden.

Reducer plates -  The reducer plates are great for supporting vertical cane plants.  The 6 smaller holes surrounding the center plant are perfect for adding accent plants.  The reducer plates can be used with the crib if additional support is needed.  Without the reducer plates, the plants will be centered in the top of the cylinder and suspended.  The reducer plates do not lock in place so you must be careful when creating and cleaning your arrangement.

Cylinder - 6in diameter and 14in tall (approx) PLEASE NOTE All glass cylinders will have some of the following imperfections:  Swirls, bubbles, spider cracking, irregular bottoms, scarring or minor scratches, small chips on top edge.  These imperfections are deemed acceptable due to their manufacturing process.  Some or a few are in ALL cylinders.  They are not noticeable when the unit is filled and running.

*Cleaning:  Water changes and plant cleaning occur every 2-3 weeks.  I do not recommend going longer than 3 weeks between cleanings to prevent your water from clouding and odors.  Simply disconnect your air line lift the plant stand off the unit and place in sink. This allows you to easily maintain your plant's roots.  Do not use any cleaning agents on your G2 parts.  Use the soft bristle brush provided as needed and tap water (tap water is fine for cleanings not growing)  only when cleaning your plant roots and system parts.  Algae easily comes off with your brush.  Be sure to give your plant a thorough rinsing before placing it back into your clean water filled cylinder.   Never attempt to carry your cylinder while filled with water.  Pour water from cylinder into a bucket before attempting to move or wash your cylinder.  Wash cylinder with soap and water, rinse thoroughly, and dry outer surface of cylinder.  Place empty cylinder back on unit base and fill with distilled, reverse osmosis or at the very least filtered water to approximately 3 inches from the top of the cylinder.  Return your freshly rinsed plant stand back into your cylinder and lock it in place.  Now fill your cylinder with water to the bottom of the collar.  You may need to add water weekly to your cylinder to maintain the proper water level, which is the bottom of the collar.  Always wipe off any excess water from the unit base after filling.  

*Feeding:  It is recommended to feed plants every 6 weeks with the Jungle Juice plant food included with your system.   We recommend using your plant food at half strength, which is .5ml per gallon of water. (Full strength is 1ml plant food per gallon of water.) Your cylinder holds approximately 1.3 gallons of water.  Place the .5ml of plant food into your cylinder and allow the plant to stay in the plant food mixture for 5 to 7 days.  After 5 to 7 days, clean your system as directed above.  Do not start feeding your plants until they have at least and inch of new water roots.  This can take 6 to 12 weeks for some plants.

*Lighting:  Your system comes with 2 light sources.  The base mounted Hydro light that up lights your cylinder and the overhead grow light that will extend up to 60 inches in height.  The overhead grow light mast is flexible on the end for light adjustment as needed. The lights have their own controllers mounted on the rear bottom edge of your unit.  The base light we recommend running 12 hours per day and the overhead light we recommend running 16 hours per day.  The lights will come on every day at the time they are activated.   Push the bottom red button to turn the light on and then toggle through the button with the clock on it to select the duration of time.  Yellow is for 8 hours, green is for 12 hours, and red is for 16 hours.   The light will come on daily at the time you select your settings.  The buttons with the + and - are for bright or dim settings.  You can dim your base light for a nice soft light effect.  You only need to reset the timers if the electric is shut off from the unit.

Plant Stand   -  The proprietary plant stand allows you to protect your plant masterpiece when cleaning.  It holds the plant for root maintenance and cleanings.  Place your stand in your sink and give your plant a good rinse before placing it back into your clean water filled cylinder.

Measurements - 7in diameter 19tall - weight (not filled with water) 8.5lbs 110v - cord length 5ft

Never use cleaning agents on your G2 parts.  Always wipe off excess water from unit after filling with water.

Please let us know if you have any questions or guidance.

Thank you for the support!  HAPPY HYDRO!

The gang at PlantDaddy.pro     Contact@Plantdaddy.pro 407-894-4121