PRE-ORDER PURCHASE - PRODUCT WILL NOT START SHIPPING UNTIL APPROX. NOVEMBER 11TH
$259.95 10% Discount! Now $229.95
$279.95 10% Discount (with optional overhead grow light) Now $249.95
Hydroponic growing is absolutely the easiest and most amazing way to grow tropical plants! The visually stunning root growth creates living art, plus 98% of your bug issues are gone. Our stylish and ultra easy to use PLANTDADDYGRO system is a result of major design changes. The most awesome improvement is the built-in plant stand which allows cleaning to become a breeze! The unit also has easy access to the built-in pump, individual light timers, and mechanisms. These are all housed in an elegant 3D printed designer colored base with ONLY 1 POWER CORD for the entire unit.
The only option when ordering your PLANTDADDYGRO is the overhead light option.
*DO NOT PLACE THE PLANTDADDYGRO SYSTEM IN DIRECT SUNLIGHT OR IN A HIGH HEAT AREA! Intense heat can damage the unit. We only recommend using the unit indoors.
-Base - The base houses the adjustable air pump, USB/110 Power Block - All airlines and back siphon valve are in assembled and in place.
*The PLANTDADDYGRO system offers several ways of growing your hydroponic plants
-Collar - Using just the open collar that fits on top of the cylinder allows you to suspend plants freely on top of the cylinder. You will need to use plants with arm appendages that will support the plant.
-Crib - The crib drops into the collar and allows you to create hydro gardens combining multiple plants together. The crib acts like tongs and holds and supports one larger plant or multiple smaller plants
-Reducer plates - The reducer plates are great for supporting vertical cane plants. The 6 smaller holes surrounding the center plant are great for adding accent plants. The reducer plates can be used with the crib if additional support is needed. Without the reducer plates the plants will be centered in the top of the cylinder and suspended.
Cylinder - 6in diameter and 14in tall (approx) PLEASE NOTE All glass cylinders will have some of the following imperfections. Swirls, bubbles, spider cracking, irregular bottoms, scarring or minor scratches small chips on top edge. These imperfections are deemed acceptable due to their manufacturing process. Some or a few are in ALL cylinders. They are not noticeable when the unit is filled and running.
*Cleaning: Water changes and plant cleaning occur every 2-3 weeks. Simply lift the plant stand off the unit and place in sink. This allows you to easily maintain your plants roots. Do not use any cleaning agents on your PLANTDADDYGRO parts. Use the soft bristle brush and tap water only when cleaning your plant roots and system parts. Algae easily comes off with your brush and tap water. Be sure you to give your plant a thorough rinsing before placing it back into your clean water filled cylinder. Never attempt to carry your cylinder while filled with water. Pour water from cylinder into a bucket before attempting to move or wash your cylinder. Wash cylinder with soap and water, rinse thoroughly, and dry outer surface of cylinder. Place empty cylinder back on unit base and fill with distilled, reverse osmosis, or very least, filtered water till approximately 3 inches from the top of the cylinder. Now return your freshly rinsed plant stand back into your cylinder and lock it in place. Now fill your cylinder with water to the bottom of the collar. You will need to add water weekly to the cylinder when needed. Only replenish to the bottom of the collar. Always wipe off any excess water from the unit base after filling.
*Feeding: It is recommended to feed plants every 6 weeks with the Jungle Juice plant food included with your system. We recommend using your plant food at half strength. Full strength is 1ml plant food per gallon of water. Your cylinder holds approximately 1.3 gallons of water. Half strength would be .5ml that you put into your cylinder. Only allow the plant to stay in the plant food mixture for 5 to 7 days then clean and reset your system.
*Lighting: Your system comes with 2 light sources. The base mounted Hydro light that up lights your cylinder and the overhead light that will extend up to 60 inches in height. The overhead light mast is flexible on the end for light adjustment as needed. The lights have their own controllers mounted on the back of your unit. The base light we recommend running 12 hours per day and the overhead light we recommend running 16 hours per day. The lights will come on every day at the time they are activated. Push the bottom red button to turn the light on and then toggle through the button with the clock on it to select the duration of time. Yellow is for 8 hours, green is for 12 hours and red is for 16 hours. The light will come on daily at the time you select your settings. The buttons with the + and - are for bright or dim settings.
Plant Stand - The proprietary plant stand allows you to protect your plant masterpiece when cleaning. It holds the plant for root maintenance and cleanings. Place your stand in your sink and give your plant a good rinse before placing it back into your clean water filled cylinder.
Measurements - 7in diameter 19tall - weight (not filled with water) 8.5lbs 110v - cord length 5ft
Never use cleaning agents on your PLANTDADDYGRO parts. Always wipe off excess water from unit after filling with water.
Please let us know if you have any questions or guidance.
Thank you for the support! HAPPY HYDRO!
The gang at PlantDaddy.pro Contact@Plantdaddy.pro 407-894-4121